N-Clear Nano · Extension
Automatic fleece filtration for your AIO aquarium
The N-Clear Nano is an automatic fleece roller filter for compatible 10–50 gal (38–190 L) AIO aquariums. The fleece advances as it collects debris, reducing routine filter-sock or pad changes.
- Automatic mechanical filtration
- Compact body with tank-specific adapter options
- Single or synchronized dual-filter operation
- For freshwater and saltwater aquariums
Having trouble playing? Watch on YouTube.
Supported Tanks
N-Clear Nano is documented for the specific all-in-one models listed below. Innovative Marine NUVO Fusion 10, 14, 15, 20 and 25 AIO tanks are a direct fit. Selected Waterbox, UNS Dual AIO and Fiji Cube models fit with a model-specific N-Fit Nano adapter; other models in the same lines may not fit or may need N-Clear M instead. For example, UNS Dual AIO 45SA and 60SA are not compatible. Coralife BioCube, Fluval Flex and Evo, and Red Sea Max Nano G1 and G2 are not compatible. Check your exact model in the table below before ordering.
For tanks or sumps with standard 4-inch filter sock holders, see N-Clear M
| Brand | Model | Fit |
|---|---|---|
| Aqua One | ||
| Aqua One | AquaNano 60 | With adapter |
| NanoReef 80 | With adapter | |
| AquaManta | ||
| AquaManta | Nano 60 | With adapter |
| Aquatop | ||
| Aquatop | Recife ECO 24, 40 | With adapter |
| Blue Marine | ||
| Blue Marine | Reef 160 | With adapter |
| Coralife | ||
| Coralife | BioCube (all models) | Not compatible |
| Fiji Cube | ||
| Fiji Cube | 10, 20, 22, 32, 38 AIO | With adapter |
| Fluval | ||
| Fluval | Flex, Evo | Not compatible |
| HelloReef | ||
| HelloReef | 15, 33 | With adapter |
| IceCap | ||
| IceCap | 20 AIO | With adapter |
| 45, 60 AIO | With adapter | |
| Innovative Marine | ||
| Innovative Marine | NUVO Fusion 10, 14, 15, 20, 25 AIO | Direct fit |
| NUVO Fusion 30, 40, 50 AIO | Use N-Clear M | |
| SR 60, 80, 120 AIO | Use N-Clear M | |
| JBJ | ||
| JBJ | 15, 20 | With adapter |
| 10 | Not compatible | |
| Brand | Model | Fit |
|---|---|---|
| Landen | ||
| Landen | 30C, 35C, 40C, 45P | With adapter |
| Lifegard | ||
| Lifegard | AIO | Not compatible |
| Mantis | ||
| Mantis | Rubicon 4.0, 40L | With adapter |
| Maxspect | ||
| Maxspect | Dice AIO 12 | With adapter |
| Red Sea | ||
| Red Sea | Max Nano G1, G2 | Not compatible |
| Reef Casa | ||
| Reef Casa | Studio, Cube, Laguna, La Casa | With adapter |
| Pico, Tide | Not compatible | |
| Tideline | ||
| Tideline | 31, 47, 62 | With adapter |
| 7, 11, 13 | Not compatible | |
| UNS | ||
| UNS | Dual AIO 30A, 35A, 40A, 45A, 60A, 75A, 90A, 90LA, 75SA, 90SA | With adapter |
| Dual AIO 45SA, 60SA | Not compatible | |
| Waterbox | ||
| Waterbox | 10, 15, 20, 25 | With adapter |
| 35.2, 40.2, 50.3 | With adapter | |
| 50 Peninsula | Use N-Clear M | |
| 65.4 AIO | Use N-Clear M | |
| YiDing | ||
| YiDing | 37.5 gal Peninsula AIO | With adapter |
What’s Included
| Main unit | One motorized filter, controller, optical sensor, US-plug power adapter, and one starter fleece roll |
|---|---|
| Extension unit | One motorized filter, dual-link cable, and one starter fleece roll. Connects to a Main unit; no separate controller, sensor, or power adapter |
| Value kits | The selected Main and Extension units with their included components |
| Free gift | N-Neon 3D fluorescent stickers |
| Sold separately | Tank-specific N-Fit adapters |
Technical Specifications
| Configurations | Main: a complete standalone filter for one filtering position · up to 300 GPH (1,135 L/h) Main + Extension: two synchronized filters for two filtering positions · up to 600 GPH (2,271 L/h) |
|---|---|
| Dual setup | Recommended for aquariums with two filter chambers, especially systems above 25 gal (95 L). Both filters advance together from the Main unit’s controller and sensor |
| Mounting | Each filter needs its own mounting position and, where required, its own adapter |
| Filter footprint | 2.56″ × 2.56″ (65 × 65 mm) |
| Height, excluding fleece | 12.2″ (31 cm) |
| Fleece roll | 1.61″ (41 mm) wide × 82 ft (25 m) long |
| Typical roll life | 3–6 weeks, depending on bioload, flow, tank size, and sensor height |
| Cables | Sensor, motor, and power adapter cables: approximately 60″ (150 cm) each |
| Power | 100–240 V AC input; 12 V DC, 2 A output. US plug included |
| Replacement power supply | 12 V DC, 2 A or higher, with a 5.5 × 2.1 mm (5521) barrel connector and the correct local plug |
| Fleece material | Food-grade material, independently tested to meet U.S. FDA food-contact standards (21 CFR 177.1630) |
Setup & Usage Notes
- Before installing or cleaning
Disconnect power before installation, removal, or cleaning. Keep the controller, power adapter, and electrical connections dry.
- Installation
Follow the manual to install the filter and set the sensor with clean fleece and normal return flow. Read the N-Clear Nano User Guide →
- Fleece rolls
Please do not use third-party fleece rolls. Differences in roll length, width, and thickness can place significantly different loads on the motor. Improper rolls can damage the motor and body, and any resulting damage will void the warranty.
- Adapter water bypass
A small amount of water may flow around the adapter, as it does with traditional filter-media baskets. This minor bypass is acceptable and does not significantly affect overall filtration efficiency.
Warranty & Support
Where to buy
N-Clear Nano is designed by Nature Dimensions and sold directly at naturedimensions.com, the brand’s official store. Orders placed directly with Nature Dimensions are covered by our one-year limited warranty plus a six-month extension, for 18 months total. Not sure it fits your tank? Contact our support team before ordering.
Product help
For setup, use the official N-Clear Nano User Guide. For order and shipping questions, visit Help & FAQ. Contact us if you need help choosing a configuration or resolving a product problem.
Loved by the Reefing Community
Real tanks, real setups


