N-Clear Nano Video Guide

1. How It Works

The N-Clear Nano Filter uses an optical water-level sensor to detect clogging of the fleece media. When debris blocks water flow, the water level rises. Once it reaches the sensor, the motor activates and rolls fresh fleece, restoring flow and clarity.

2. Installation & Setup

Sensor Adjustment Tutorial:

  1. Check the initial water level in the filter case. The ideal level should be ~1/2 inch below the emergency overflow opening...
  2. Position the sensor slightly above the emergency overflow opening.
  3. Raise/lower the sensor based on triggering frequency and fleece status.

3. Compatibility & Adapters

Please refer to our product page for the latest list of supported AIO tanks. If your tank is under 30 gallons but not listed, feel free to contact us.