Nature Dimensions Official Store
N-Fit Nano アダプター
N-Fit Nano アダプター
受取状況を読み込めませんでした
- $59.99以上で送料無料 エコノミー $4.99 | お急ぎ便 $9.99 | エクスプレス $29.99
- Nature Rewards 5%割引 メール登録で対象商品がお得になります
N-Fit Nanoアダプター お客様の N-Clear Nanoフィルター 対応するオールインワン型水槽に対応しています。
N-Fit Nanoアダプタのインストールガイドを参照してください。
アダプターに関する注記: 現在のアダプターにはシリコン製ガスケット層は含まれていません。これは想定内のことであり、通常の取り付けには影響ありません。
アダプター適合リスト
N-Fitアダプター S8075
- アクアトップ24、 40
N-Fitアダプター S8080
- ウォーターボックス10–25
- UNS デュアルAIO 30A、 35A、 40A、 45A、 60A
- ランデン30C、 35C、 40C、 45P
- マックススペクトダイスAIO 12
N-Fitアダプター S8080L
- UNS 90LA デュアルAIO
N-Fitアダプター S8080H
- 互換性のあるS8080 タンク用のハングオンオプション。元のアダプターサポートブロックまたはホルダーが紛失している場合に使用します。
N-Fitアダプター S8085
- ReefCasa スタジオ、キューブ、ラグーナ、ラ カーサ
N-Fitアダプター S8088
- HelloReef 15
- アイスキャップ20
N-Fitアダプター S80120
- HelloReef 33
- ウォーターボックス35.2、 50.3
N-Fitアダプター S8010
- アクアワン アクアナノ60
N-Fitアダプター S8016
- アクアマンタナノ60
N-Fitアダプター S9089
- フィジーキューブ10、 20、 22、 32、 38
N-Fitアダプター S9010
- JBJ 15
N-Fitアダプター S9015
- JBJ 20
N-Fitアダプター S8013
- タイドライン31、 62
N-Fitアダプター S8014
- 潮位線47
N-Fitアダプター S1010
- ブルーマリンリーフ160
N-Fitアダプター S1014
- YiDing 37.5 -ガロン半島AIO
N-Fitアダプター S9513
- IceCap 60 AIO; 推奨デュアルナノセットアップでは2つのアダプターを使用します
N-Fitアダプター S9595
- マンティス・ルビコン4.0
N-Fitアダプター S9595H
- マンティス・ルビコン40L
アダプターは不要です
- Innovative Marine 10、 14、 15、 20、 25
互換性がありません
- ライフガードAIOタンク
- ウォーターボックス50 半島
- リーフカサ・ピコ、タイド
- 非3.2インチ× 3.2インチチャンバーを備えた旧型UNS Dual AIOモデル
- Fluval AIO水槽
- バイオキューブ
- レッドシーマックスナノ
お使いのタンクがリストにない場合は、ご注文前にご連絡ください。
適切なアダプターを確認するため、タンクの正確な型番とチャンバーの寸法/写真をお送りください。
カスタムアダプターのご注文: 製造前に、アダプターの設計図と寸法を送付いたしますので、お客様のタンクと照らし合わせてご確認ください。
Share

N-Fit Nano アダプター
Nice adapter but the piece that goes to the back don't fit
Thanks for the feedback, Peter. The rear piece shown in your photos is the optional height riser for the S8075 adapter. It is only needed if the main adapter needs to sit higher, and it does not need to snap into the filter or the inner frame. We followed up directly with the installation guide and are glad we could clarify this with you.
Fits perfectly
Quick shipping!
What can i say? It fits!
There is a little bit of sag/leaning back of the fleece roller with this adapter as it's only supported by the tank in the front. I feel like it's probably about as good as it can get as a plug and play solution but I 3D printed a small attachment to support the back of the adapter from the back rim of the tank.